The fine that binds, crusher dust compacts to a hard, even surface under pavers, around pipes and over fills.
Crusher dust is the fine byproduct of rock crushing, particles from about 5mm down to dust, and one of the most useful materials on any site. It screeds flat, compacts hard, and forms a firm, stable bed under pavers, slabs and tanks.
Plumbers use it for haunching and trench finishing; landscapers for paths and as a base under synthetic turf; civil crews as a binding layer over coarse fills. Economical, consistent and available everywhere we deliver.
| Material type | Crusher dust (fine crushed rock) |
|---|---|
| Nominal size | 5mm minus |
| Character | Binds and compacts tight |
| Typical compacted density | ~1.8 to 2.0 t/m³ (indicative) |
| Common uses | Paver and pipe bedding, binding fill |
Figures shown are indicative typical properties and vary by source; details for your delivery are available on request.
Full loads to open sites, sized to your access and the day's program.
Maximised payload where site access and mass limits allow it.
Every load GPS-tracked from the weighbridge to your gate, with the tonnes on the docket.
Screeds to a firm, even bedding layer that compacts tight.
As a guide, this material weighs around 1.9 tonnes per cubic metre. Multiply your area by the layer depth to get the volume, then by the density. Tell us the area and depth on the quote form and we will convert it to tonnes and price the delivery for you.
100 m² at 50 mm deep = 5 m³ × ~1.9 t/m³
Tell us the volume, the site and the program. Every load is tracked live through NXT Control, from quarry to your gate.