The trench standard, 7mm bedding that flows around pipe, supports the barrel evenly and drains for life.
Pipe bedding has one job: support the pipe uniformly so point loads never form. 7mm single-size screenings do it best, small enough to flow under and around the barrel with minimal compaction effort, clean enough to keep groundwater moving along the trench.
It’s the daily bread of sewer, stormwater and utility crews. For authority work we supply certified WSAA embedment grades (WSA 361 and related specs) with documentation; for everything else, clean 7mm bedding by the truckload, every load digitally docketed.
| Material type | Fine crushed rock pipe bedding |
|---|---|
| Nominal size | 7mm |
| Function | Beds and haunches pipe evenly |
| Standard | Embedment to WSAA specification available |
| Typical density | ~1.4 to 1.6 t/m³ (indicative) |
| Common uses | Water, sewer, gas and electrical trenching |
Figures shown are indicative typical properties and vary by source; details for your delivery are available on request.
Full loads to open sites, sized to your access and the day's program.
Maximised payload where site access and mass limits allow it.
Every load GPS-tracked from the weighbridge to your gate, with the tonnes on the docket.
Even, supportive bedding for water, sewer, gas and electrical trenching.
As a guide, this material weighs around 1.5 tonnes per cubic metre. Multiply your area by the layer depth to get the volume, then by the density. Tell us the area and depth on the quote form and we will convert it to tonnes and price the delivery for you.
100 m² at 100 mm deep = 10 m³ × ~1.5 t/m³
Tell us the volume, the site and the program. Every load is tracked live through NXT Control, from quarry to your gate.