Crushed rock at optimum moisture, straight off the truck, place it, roll it, test it. No water cart required.
Wet-mix is crushed rock pre-conditioned at the plant to its optimum moisture content for compaction. It arrives ready to place and roll, no on-site watering, no guesswork, and density results that pass first time because the moisture is right through the material, not sprayed on top.
Available across the full class range, it’s the efficient choice for crews chasing program: every hour not spent conditioning material is an hour paving. Scheduled and tracked so the material lands when the roller is ready.
| Material type | Wet-mix crushed rock |
|---|---|
| Nominal size | 20mm and 40mm |
| Specification | Supplied to VicRoads Section 812, Class 2 to 4 |
| Moisture | Pre-mixed at optimum moisture content |
| Benefit | Ready to spread and compact on delivery |
| Typical compacted density | ~2.0 to 2.2 t/m³ (indicative) |
| Common uses | Pavement base and sub-base needing immediate compaction |
Figures shown are the supply specification and indicative typical properties. Source rock and exact test values vary by quarry; current batch test certificates for your delivery are available on request.
Full loads to open sites, sized to your access and the day's program.
Maximised payload where site access and mass limits allow it.
Every load GPS-tracked from the weighbridge to your gate, with the tonnes on the docket.
Wet-mixed to your nominated class, at optimum moisture for immediate placement.
As a guide, this material weighs around 2.1 tonnes per cubic metre. Multiply your area by the layer depth to get the volume, then by the density. Tell us the area and depth on the quote form and we will convert it to tonnes and price the delivery for you.
100 m² at 150 mm deep = 15 m³ × ~2.1 t/m³
Tell us the volume, the site and the program. Every load is tracked live through NXT Control, from quarry to your gate.