Honest, clean, compactable, general fill for raising levels and building the ground your project stands on.
General fill is clean, inert material, typically a mix of soil, clay and rock fines, for raising site levels, filling excavations and building up pads where an engineered classification isn’t required. The key word is clean: ours comes from known sources, free of contamination and rubbish.
For structural applications we step you up to select or engineered fill with compaction documentation; for everything else, general fill delivers honest cubic metres at the best rate. Supply and disposal can be coordinated together, one truck, both directions, nothing wasted.
| Material type | Clean compactable fill |
|---|---|
| Specification | Inert and compactable; classification on request |
| Grading | Graded for bulk earthworks |
| Typical compacted density | ~1.9 to 2.1 t/m³ (indicative) |
| Common uses | Level correction, building pads, bulk fill |
Figures shown are indicative typical properties and vary by source; details for your delivery are available on request.
Full loads to open sites, sized to your access and the day's program.
Maximised payload where site access and mass limits allow it.
Every load GPS-tracked from the weighbridge to your gate, with the tonnes on the docket.
Selected to compact and carry load for pads and earthworks.
As a guide, this material weighs around 2 tonnes per cubic metre. Multiply your area by the layer depth to get the volume, then by the density. Tell us the area and depth on the quote form and we will convert it to tonnes and price the delivery for you.
100 m² at 200 mm deep = 20 m³ × ~2 t/m³
Tell us the volume, the site and the program. Every load is tracked live through NXT Control, from quarry to your gate.