Sharp, washed and consistently graded, the sand your concrete strength depends on.
Concrete sand is a coarse, sharp sand washed free of clay and silt and graded for batching: the fine aggregate that fills the voids between stone and gives a mix its workability. Strength starts here, dirty or inconsistent sand is the fastest way to fail a cylinder test.
Ours comes from established sand resources with consistent fineness modulus load after load, suiting structural concrete, screeds and renders. Daily bulk volumes available, weighed and tracked like everything we move.
| Material type | Concrete (washed) sand |
|---|---|
| Character | Sharp, washed and consistently graded |
| Use context | Concrete and screed batching |
| Typical density | ~1.4 to 1.6 t/m³ (indicative) |
| Common uses | Concrete, screed, paving mortar |
Figures shown are indicative typical properties and vary by source and batch; details and conformance for your delivery are available on request.
Supplied loose in bulk and delivered by tipper, sized to your access and the day’s program.
Screened and washed to a clean, consistent grade, batch to batch.
Conformance and certificates supplied for specified sands on request.
Every load GPS-tracked from the yard to your gate, with the tonnes on the docket.
Sand is supplied by the tonne. As a guide it weighs around 1.5 tonnes per cubic metre, so multiply your area by the depth for the volume, then by the density. Tell us the job on the quote form and we will work out the tonnes and price the delivery.
50 m² × 0.1 m deep = 5 m³ × ~1.5 t/m³
Tell us the volume, the site and the program. Every load is tracked live through NXT Control, from yard to your gate.